The horizontal design of this smart phone holder will make wearing it comfortable, even when in a sitting position. It’s been designed to be worn on a belt either by threading the belt through a loop on the back of the holder, or hanging it from an O ring and clasp. The Velcro closure is applied during the embroidery process and the holder is quilted in the hoop to provide some protection for the device. Personalize the holder with an initial as shown; our ½” Classic Block font was used on our sample. But you can also stitch the design without the monogram label.
There is a seam at the bottom of the lining that will need to be hand sewn or fused shut. There also is a very small amount of machine stitching to create the belt loop. The holder is completely lined and all seams are hidden.
This in-the-hoop project requires a 7×11″ or larger hoop.
The holder can accommodate phones up to 3.00×6.00″. It can also serve as a billfold, coupon holder, etc. It can even hold a passport!
Finished holder size: 4.25×6.50″
Available Formats - All designs come in the following embroidery formats: dst, exp, hus, jef, pes, shv, vip, vp3, xxx.
Designs will be downloaded in one zip file. If for some reason your desired format is not found, please contact us.
