Description
These top zippered bags are a partial in the hoop project. The zipper is applied in the hoop. The bags are geometrically quilted in the front and back and the inside is fully lined; no seams are visible. The grosgrain ribbon is stitched to the bag and then the label is appliqued in place. All done in the hoop. Unlike the 6×10 version, this bag requires three simple and quick hoopings. The side seams get stitched on the sewing machine, as does the boxed bottom of the bag. If you have stitched one of our updated giftbags, this technique will look very familiar to you!
You are receiving two versions of the bag: One with a round, decorative label , another with a rectangular label. For a plain version, just stitch the back twice.
No font included. Shown is our Pauline ¾” font on the round label and our Tiny Alright font on the rectangular label.
Dimensions & Stitches
Bag with round label
Hooping 1 (back) 4.95×6.96”” 6,377
Hooping 2 (front) 4.95×6.97” 9,141
Hooping 3 (zipper) 1.00×6.94” 558
Bag with rectangular label
Hooping 1 (back) 4.95×6.94” 3,559
Hooping 2 (front) 4.95×6.94” 5,318
Hooping 3 (zipper) 1.00×6.94” 558
Finished bag size: 3.75” tall x 5.00” wide x 2.00”deep
Supplies Needed
2 coordinating fabrics for the outside of the bag and the lining
5/8” grosgrain ribbon
Small piece of fabric for the label
12” zipper (polyester or nylon – NO metal teeth)
Small, curved tip scissors
Fusible fleece (Pellon 971 F – heavier weight – preferred)
Painter’s tape
Spray adhesive for embroidery machines
Small curved tip sharp scissors
Steam a Seam 2 Lite
Available Formats - All designs come in the following embroidery formats: art, dst, exp, hus, jef, pes, shv, vip, vp3, xxx.
Designs will be downloaded in one zip file. If for some reason your desired format is not found, please contact us.
Related Downloads
